Best Mobile Power Equipment Repair Service Denver

Looking for Best Mobile Power Equipment Repair Service Denver? Call Us: 720-706-4028 Low Cost!

Hey guys, welcome returned to my small engine restore channel. Today, I need to show you some thing very crucial with regards to your MS 170 and MS a hundred and eighty chainsaw.

What I’m going to reveal you these days could be very important when you do a positive type of repair in this saw. If you don’t follow my instructions nowadays, you may damage your chainsaw or it could be so high-priced to restore that it can not even be worth solving.

Denver Small Engine Repair Cost Estimate

I’m going to get proper into it, guys, and I certainly have a chainsaw right here at the bench that human beings added in and they did precisely what I will display you today, which you ought to not do.

What I’m talking about right here is wherein the choke lever attaches into the body of the saw. What I have a tendency to peer a lot is human beings try to paintings on their saws themselves. They go to pop off the choke lever to put off the carburetor and stuff like that.

And within the method, they come to be breaking the plastic component here where the choke lever sits proper in. And you may see it thoroughly over here, it’s damaged. That’s why the choke lever on this noticed right here is all free. The different give up of the choke lever is going right via this hole right right here.

Custom Small Engine Repair Denver

This component right here typically in no way breaks, however it’s always over here that humans wreck it. And here’s any other noticed here, this is an MS-180C.

It’s the identical thing, it’s made the equal. And you may see right right here that the choke lever on this one is badly set up, so it’s this small little part right here that finally ends up breaking.

So what I’ll do right here is just fast show you how to get rid of it with out breaking that part. I’m going to spray a bit of Liquid Wrench on it first. It does assist a bit. And I want to eliminate the choke linkage before I put off it.

So what I do is I put a flat screwdriver proper underneath the choke arm and then I pry upwards. You can see how without problems it got here out of that hole and not using a excessive resistance.

And that’s due to the fact I turned into pushing instantly up where the hollow exits. That’s why it’s genuinely essential which you don’t push backwards because you will break the small plastic piece here.

So again, right here it is whilst it’s properly eliminated. You’ve got this part all intact while it wasn’t eliminated properly, half the elements broken off, in order that choke lever will no longer sit down in there again.

Emergency Small Engine Repair in Denver

And now what I’m going to do is display you a way to reinstall this part and the choke linkage with out breaking this or any of the opposite elements. And now, to reinstall this part, I first align it in the hollow over right here.

And I’ll be cautious with the transfer spring right right here. Make sure it’s out of the way. You don’t want to bend that. If you bend it an excessive amount of, it’ll wreck your transfer.

So if you role it like this and then position the choke arm right right here so that this inner part between the arm and the outer part of the arm is going right above the small plastic piece, and you could lube it up once more in case you need, after which I just push it down till you pay attention it click, much like that.

Denver Small Engine Repair Quotes

Now the whole thing’s on properly. Now to reinstall the choke linkage, shove it into the choke arm, line up the element at the carb here, and as soon as it’s in like that, it’s installed efficiently and no parts are damaged. And when you’re performed, you need to check everything.

Try out the choke as well. And remember, on those saws, to get the choke absolutely on, you have to depress the throttle cause to get it all the manner down. So if you try to push the choke down without miserable the throttle lever, it gained’t move down. And this is additionally a purpose why humans come to be breaking stuff in right here.

They don’t recognize you need to be holding the trigger to get it down. And it’s the equal to get it up, you need to maintain down the cause in order that the choke will absolutely come off.

Now it’s very vital if you have to dispose of the choke lever that you do it successfully, men, because in case you end up breaking it like this saw here, you’ll turn out to be having to update the entire case under, minus the recoil and the handlebars, and it can be lots of hard work due to the fact you’re going to need to dispose of all of the parts from inside that plastic case.

Denver Small Engine Repair Estimate

And if you’re paying somebody to do that, it’s in all likelihood now not really worth doing.

And right here’s an illustrated elements list. It would be this whole component over here which you could want to update. So it’s the most important thing of the saw itself. And in many cases, I simply referred to, it gained’t be well worth fixing if you’re paying a mechanic to do it, particularly while you can purchase those for $229 in Canada right now in 2022.

I’m sure it’s inexpensive within the United States. So once more, these are saws that if you get too much damage, just forget it, just pass buy any other one. So I hope you guys enjoyed the video, and I wish that I could be saving you some important repairs in the future while you paintings to your O17, O18, MS-170, and MS-one hundred eighty chainsaw. Thanks for looking, and feature a extraordinary day.