Mobile Power Equipment Repair Cost Denver

Searching for Mobile Power Equipment Repair Cost Denver? Call Us: 303-951-7362 Instant Quote!

How To Fix A Surging Engine on a Lawn Mower, Generator, Pressure Washer & More

Is your lawn mower, generator, pressure washer, or any other small engine device stuttering and surging during operation? This common problem, known as engine surging, can be frustrating and hinder the efficiency of your equipment. However, fear not! In this article, we will guide you through five simple steps to fix a surging engine and get your equipment running smoothly again.

Check the Air Filter

A clean air filter is essential for the proper functioning of your small engine equipment. A clogged or dirty air filter can restrict the airflow, leading to engine surges. Follow these steps to check and clean or replace the air filter:

1. Start by locating the air filter housing, usually on the side or top of the engine.
2. Remove the cover and inspect the air filter for dirt, debris, or damage.
3. Clean the filter using compressed air or gently wash it with mild soap and water. If the filter is damaged or excessively dirty, replace it with a new one.

Clear the Fuel System

A fuel system blockage or contamination is another common cause of engine surging. To clear the fuel system, follow these steps:

1. Start by draining the fuel tank completely.
2. Inspect the fuel lines for any signs of damage or blockage. If necessary, replace the lines.
3. Clean or replace the fuel filter.
4. Refill the tank with fresh, clean fuel.

Adjust the Carburetor

An improperly adjusted carburetor can also cause engine surges. Here’s how you can adjust it:

1. Locate the carburetor, usually found on the side of the engine.
2. Identify the idle speed and fuel mixture adjustment screws. Refer to the equipment’s manual to find the specific locations and instructions.
3. Adjust the idle speed screw, turning it slightly counterclockwise to lower the speed. If the engine still surges, try turning it clockwise slightly.
4. Adjust the fuel mixture screw by turning it slowly in or out until the engine runs smoothly without surging. Again, refer to the manual for precise instructions.

Inspect the Ignition System

A faulty ignition system can contribute to engine surging. Perform the following checks to ensure everything is working correctly:

1. Examine the spark plug for signs of wear, damage, or carbon buildup. Clean or replace it if necessary.
2. Check the spark plug wire and make sure it is securely connected to both the spark plug and the ignition coil.
3. Inspect the ignition coil for any damage or loose connections. Replace if needed.

Clean or Replace the Carburetor

If all the previous steps fail to fix the surging engine issue, cleaning or replacing the carburetor may be necessary. Refer to the equipment’s manual for detailed instructions on how to clean or replace the carburetor.

Call to Action:
Congratulations! By following these steps, you should now have a much smoother running engine on your lawn mower, generator, pressure washer, or any other small engine device. Remember to consult the equipment’s manual for any specific instructions. If you encounter any difficulties, it is always a good idea to seek professional assistance from a qualified technician. Enjoy your equipment’s improved performance and get back to maintaining your outdoor spaces with ease!